What is the Audio Mixer, EQ & Compressor?
The Audio Workspace transforms your browser into a full multi-track recording studio console. Mix dialogue, sound effects, and music with tactile vertical faders (+12 dB headroom) and stereo LED peak meters. Sculpt frequencies with an interactive 4-band parametric EQ, control dynamics with a visual compressor and limiter, and automatically duck background music whenever dialogue is detected.
When and Why to Use This Tool
- Balancing dialogue, background music, and sound effects to broadcast loudness standards.
- Removing low-end rumble or air conditioner hum using high-pass / shelf filters.
- Taming loud volume spikes and boosting quiet whispers with dynamics compression.
- Automatically lowering music volume when an actor or voiceover speaks.
- Panning audio channels left and right for immersive stereo separation.
Visual Anatomy & Interface Controls
Understanding the cursor feedback, indicators, and controls of the Audio Mixer, EQ & Compressor.
Console Channel Strips
Dedicated vertical faders for every audio track plus Master bus with peak LED level meters.
4-Band Parametric EQ
Visual frequency response curve with Low Shelf, Mid Bell 1, Mid Bell 2, and High Shelf handles.
Dynamics Compressor & Gate
Threshold, Ratio, Attack, Release, and Makeup Gain controls with visual compression gain reduction meter.
Intelligent Audio Ducking
Automatic sidechain attenuation of music tracks during speech segments.
How to Use the Audio Mixer, EQ & Compressor
Follow these numbered steps to master the tool quickly and avoid common pitfalls.
Switch to the Audio Workspace
Alt+Shift+6Press Alt+Shift+6 or click "Audio" in the workspace bar to open the expanded multi-track mixer and waveform lanes.
Set Target Levels on Faders
Play back your edit and adjust track faders so dialogue peaks consistently between -12 dBFS and -6 dBFS, while background music sits around -22 dBFS.
Sculpt Dialogue with 4-Band EQ
EQClick the EQ button on the dialogue track. Drag the Low Shelf handle to cut low-end mud below 80 Hz, and boost the High-Mid bell slightly around 3 kHz for crisp speech presence.
Apply Dynamics Compression
CompressorOpen the Compressor popup. Set Threshold to -18 dB and Ratio to 3:1. This smoothes out loud shouts and quiet mumbles for consistent dialogue volume.
Enable Auto Audio Ducking
DuckingSelect your background music track, enable "Auto Ducking", and assign it to duck speech on the dialogue track by -14 dB.
Power-User Workflow Secrets
Expert techniques to boost editing speed and maintain clean, professional timelines.
Target -14 LUFS integrated loudness for YouTube and streaming video platforms.
Use stereo Pan knobs to place sound effects slightly left or right to create cinematic spatial depth.
Solo (S) or Mute (M) individual audio tracks on the mixer to isolate problems during sound design.
Keyboard Shortcuts
Speed up your edits without reaching for the mouse.
| Action | Key / Shortcut | Platform Modifier |
|---|---|---|
| Switch to Audio Workspace | Shift+Alt + 6 | Mac: Shift+Alt • Win: Shift+Alt |
| Nudge Audio Gain +1 dB | Cmd/Ctrl + ] | Mac: ⌘ • Win: Ctrl |
| Nudge Audio Gain -1 dB | Cmd/Ctrl + [ | Mac: ⌘ • Win: Ctrl |
Frequently Asked Questions
Common questions about using the Audio Mixer, EQ & Compressor.
How do I remove background hiss or air conditioner hum?
Open the 4-Band Parametric EQ on that track, activate the Low Shelf / High-Pass filter, and drag the frequency up to ~100 Hz to cut out sub-bass electrical hum and room rumble.
Does audio export in full 24-bit or uncompressed PCM?
Yes! When exporting MOV or high-bitrate MP4, you can choose between AAC, Opus, or uncompressed 24-bit Linear PCM audio.